Feeds:
Posts
Comments

Posts Tagged ‘soil analysis’

Main waste rock dump at the Tintic Standard Mine.

Main waste rock dump at the Tintic Standard Mine.

In this post, we will report results and draw conclusions for our study of soil contamination in the Tintic Mining District. This study was supported by a grant from the American Chemical Society.

Students from Walden School of Liberal Arts brought back 42 samples of soils from the area in and around Eureka, Utah. Our purpose was to test for heavy metal contamination, especially lead. Previous tests done by the Utah Department of Health and the EPA showed lead contamination to be widespread throughout the town, due to the presence of historic concentration plants in the town and the use of mine waste rock as fill in many lots. Since there are mine dumps on the hillsides south of town, rain runoff also brought lead contamination into the residential areas.

Western side of the Swansea Consolidated mine dump near SIlver City.

Western side of the Swansea Consolidated mine dump near SIlver City.

These tests led the EPA to declare the town a Superfund project and spend $26 million to replace soils in some areas of town (but not all). They also placed limestone riprap over the mine dumps to prevent further runoff. The process took ten years and completely changed the look of the town, damaging or destroying several historic landmarks along the way, such as the headframes for the Eureka Hill and Gemini mines. Two landmarks, the Bullion Beck headframe and the Shea building, were restored. The rest have been left in ruins.

Middle section of the Swansea Consolidated mine dump near Silver City.

Middle section of the Swansea Consolidated mine dump near Silver City.

All of the tests we conducted were put into numerical form and entered into a spreadsheet so that we could compare the results. We used an ALTA II reflectance spectrometer to measure reflected light at eleven wavelengths, including four infrared wavelengths. We also tested the pH of the samples using several methods, including universal test strips, a garden soil test kit, and a pH meter. We tested for lead using a sodium rhodizonate solution, which changes from orange-red to pink in the presence of lead in neutral soils and to green or blue in the presence of lead in acidic soils. Please see our previous post for details on these tests. Since the rhodizonate test was qualitative, we assigned numbers depending on the color of the final solution so that some comparison could be made.

For the samples, we selected ten areas inside the town of Eureka, including some where the soil has been replaced and others where the soil is original. We tried to pick areas that were representative of the town as a whole. At each site, we sampled the surface soil and soil about six inches below the surface. We also sampled 12 sites outside of town, including areas away from town as controls and areas on or near exposed mine dumps, such as those from the Tintic Standard, Swansea Consolidated, and Tesora mines. We also took samples from gullies or washes downstream from mining areas and dumps, and from an exposed ore body (which has not been mined or processed) at a road cut along U.S. Highway 6.

Test Results:

Chart 1: Comparing Different pH Tests of Soil Samples. The readings taken with our portable pH meter provide the most consistent results (and can be done easiest in the field).

Chart 1: Comparing Different pH Tests of Soil Samples. The readings taken with our portable pH meter provide the most consistent results (and can be done easiest in the field).

As you can see from Chart 1 shown here, of the different methods we used to determine the soil pH, the pH meter was the most sensitive and consistently accurate. It was also easiest to use. It showed that most of the samples, were slightly acidic (between 6 and 7), but the samples taken from mine dumps and the areas immediately downstream were extremely acidic; in fact, some samples had a pH too low for our meter to read, which had a low limit of 2.5. Although not shown on this chart, the samples taken inside Eureka on our fourth collection trip all showed pHs near neutral (6 – 7).

Our lead test showed no discernable lead inside Eureka, even in soils that had not been replaced by the EPA. This is probably because our test is not sensitive enough for low lead levels. It becomes hard to distinguish the original color of the rhodizonate from the natural color of the soil unless there is enough lead present to create an obvious color change. In Chart 2, low levels of lead correspond very well with neutral pH soils.

Chart 2: Comparing Soil pH with Lead Levels. The lower the pH (more acidic) the soil samples were, the more lead was present with a correlation coefficient of rho = -0.876.

Chart 2: Comparing Soil pH with Lead Levels. The lower the pH (more acidic) the soil samples were, the more lead was present with a correlation coefficient of rho = -0.876.

The most interesting result of our study was to compare pH with lead levels. Chart 2 shows that the highest lead levels were found on or immediately downstream from mine dumps, which correlated very well with low pH levels with a correlation coefficient of rho = -0.876. Mine dump soils had high lead content and were highly acidic. Of course, this doesn’t imply causality: the high acid doesn’t cause lead, and the high lead probably doesn’t cause the acidity, but if one is present, so is the other.

Chart 3: Comparing Soils at Mine Dumps with Healthy Soil Using the ALTA II Reflectance Spectrometer. Healthier  soils were darker and richer in humus, whereas mine dump soils were pale and yellowish.

Chart 3: Comparing Soils at Mine Dumps with Healthy Soil Using the ALTA II Reflectance Spectrometer. Healthier
soils were darker and richer in humus, whereas mine dump soils were pale and yellowish.

In Chart 3, the reflectance spectrometer tests were inconclusive as far as detecting a signature for lead. We compared the results shown with samples of pure lead, pure galena (lead sulfide), and silver-lead ore. There were no obvious wavelengths that gave a definitive fingerprint for only lead.

The one useful result of the spectrometer tests was to confirm the overall health of the soil samples; those with lower percent reflectance overall were darker, richer, more healthy soils with more plant life growing. The lighter soils had less plant life and higher overall reflectances. The soils at mine dumps were yellowish to light purplish due to the presence of sulfur compounds, and these also had no plant life, lower pH, and higher lead.

Chart 4: Comparing the Levels of Nitrogen, Phosphorus, and Potassium in Soil Samples. The nitrogen and phosphorus tests gave no predictable results, whereas the potassium test showed higher levels of potassium in mine dump soils with high lead content (rho = .687).

Chart 4: Comparing the Levels of Nitrogen, Phosphorus, and Potassium in Soil Samples. The nitrogen and phosphorus tests gave no predictable results, whereas the potassium test showed higher levels of potassium in mine dump soils with high lead content (rho = .687).

Chart 4 shows the tests we conducted on soil nutrients. The nitrogen and phosphorus tests were inconclusive, and are probably due to the poor quality of the garden test kit we used. The potash (potassium) test did show higher potassium in the mine dump soils where lead levels were also highest, although the correlation was only moderate (rho = 0.687).

Conclusions:

A visual inspection of the mine dumps outside of Eureka, Utah in the Tintic Mining District shows that the waste rock and soils are highly contaminated. No plants grow on the dumps or in the gullies immediately below them. They are stained a bright yellowish-orange, and soils in the nearby gullies have layers of red, yellow, and even green. Overall, they are lighter and less rich than nearby soils with plant life. Our tests show that these mine dump soils are acidic and have high levels of lead contamination.

Similar mine dumps were located at the west end of town (around the Gemini and Bullion Beck headframes) and south of town (Chief Consolidated and Eagle and Bluebell mines). If the same pattern of contamination occurred there as what we found in the Swansea, Tesora, and Tintic Standard dumps, then it is likely that the soils downstream in the residential areas of town were also contaminated by lead and sulfur compounds. We did not find evidence of this in our tests of original soils inside town, but our test was not sensitive enough to find the lowest levels of lead. Soil pH throughout the town was slightly acidic, which may indicate sulfur or even lead content. We were not able to get the data from the original EPA tests.

Soil discoloration in the wash west of the main Swansea mine dump at Silver City.

Soil discoloration in the wash west of the main Swansea mine dump at Silver City.

Both pH and potassium content appear to be well correlated with lead content, with pH having a particularly high negative correlation (-0.876). Perhaps pH can be used as a marker, since it is easily measured. Where lead is suspected, a pH reading showing high acidity would indicate a strong possibility of lead. It would be interesting to see if the two measurements decouple as one travels further downstream from the mine dumps along washes and gullies. Do the lead and the acid travel the same distances?

Soil layers showing different types of contamination, in the middle wash downstream from the Swansea mine dump.

Soil layers showing different types of contamination, in the middle wash downstream from the Swansea mine dump.

Much remains to be tested. We have some additional grant funds that we will use to send four samples to an outside lab for detailed element analysis. I also hope to take all our samples to a local university and use an X-ray Fluorescence Spectrometer or Raman Spectrometer to get an accurate and precise readout of the lead levels and other heavy metal content. We need to determine the amount of sulfur compounds in the soils, and how that correlates with pH. We also need to pass our samples through a soil sieve and measure the relative sizes of particles and the amount of humus in each. We should test the mine dump soils to see if plants will grow in them compared to the other samples. Finally, we need to return to the site and collect more samples of other mine dumps, as well as the soils around and downstream from the dumps we’ve already tested. We need to determine how far the lead contamination and acidity travel down the washes and gullies and the extent to which the slope of the land affects this.

As with any field research study, it’s hard to keep all the variables constant. We’ve been careful and consistent with our tests, recording each location and using controlled testing conditions in the lab. But there are factors we can’t control. It could be that the low plant life on the dumps is simply because this is a desert, and plant life takes time to get established after soils are disturbed. The dumps were all dug up and the best materials were transferred to a leaching pile nearby in the 1980s. 30 years is not enough time for climax vegetation of sagebrush and juniper trees, but is enough time for grasses and low brush to grow. In general, soils in the area are poor in nutrients except where higher levels of water (such as in washes or gullies) allow more plants to grow and decay into better humus.

Staining on the asphalt where water draining off of the Swansea mine dump runs over the road near Silver City.

Staining on the asphalt where water draining off of the Swansea mine dump runs over the road near Silver City.

Read Full Post »

Welcome to Eureka sign on U.S. 6

Welcome to Eureka sign on U.S. 6

It’s time to take a break from recounting my tour through Colorado’s mining towns last summer and catch you up on what we’ve been doing this year at Walden School of Liberal Arts.

Maples in the fall near Eureka, Utah - with junipers and rabbit brush.

Maples in the fall near Eureka, Utah – with junipers and rabbit brush.

As mentioned earlier, we received a grant from the American Chemical Society to study lead contamination in the soils in Eureka, Utah and the surrounding area. The grant provided funds for travel, equipment, chemicals, and supplies. It took until early October to receive the money, so our first trip down had to wait until mid-October. It meant we wouldn’t have much daylight, but we’d have to do our best.

Canyon of Fire: Maples in the East Tintic Mountains

Canyon of Fire: Maples in the East Tintic Mountains

I’ve been gradually documenting the history of the area, collecting historical photos, taking photos around the town myself, etc. Back in 2009, I took a group of students with me to interview June McNulty, President of the Tintic Historical Society. He showed us through the museum and we videotaped the tour. Now, with this grant, we can tell the story of recent events in Eureka, especially the history of the EPA superfund project over the last ten years that cleaned up or covered up contaminated soils in the town.

TIntic HIgh School from the Godiva Mine site

TIntic HIgh School from the Godiva Mine site

My science research class researched the history of the area during first term while we were waiting for the grant funds. They identified 20 collection sites outside town using GoogleEarth. Some of these are old mine waste dumps, some are around smelter or concentration plants or leeching piles. Others are control sites outside the district. We were going to collaborate with students at Tintic High School, who were to collect from sites in town. Unfortunately, our collaboration fell through, so my students eventually collected from sites inside the town as well.

Valley of maple trees from a mine dump in the East Tintic Mountains

Valley of maple trees from a mine dump in the East Tintic Mountains

In preparation for our sample collection trips, I traveled down to the area to get some photos of fall foliage on Saturday, Sept. 22. I got there just at the right time, when the maples in the canyons were at their brightest. I photographed some areas along Highway 6 leading into town and filmed the maples in the canyons along the road leading over the top to Dividend. I then took videos around town by attaching a Flip camera to my left rearview mirror with a small claw-style tripod. I drove up to the Godiva mine site and took photos down toward the high school, then drove further up the canyon past the Knightsville site and hiked around some mine dumps further up. I had seen that there was a valley nestled inside the East Tintic Mountains from GoogleEarth and my 3D models of the area. There was a road leading along the edge of the hills, and I walked around as far as the site of the Iron Blossom #2 mine. The headframe there has recently collapsed. It was a nice trip and the photos turned out well. I also saw and photographed several deer.

Doe a Deer: A mule deer  doe in the East Tintic Mountains

Doe a Deer: A mule deer doe in the East Tintic Mountains

Ruins of the Irom Blossom #2 Headframe

Ruins of the Irom Blossom #2 Headframe

I took four students to the area on Oct. 19 and we collected samples and explored the area, including the road over Silver Pass. We first collected from some old evaporation ponds near Elberta where hot water pumped out from the Burgin mines was allowed to cool and settle before discharging it into Utah Lake. During the early 1980s, as I drove home from college to my hometown of Deseret, I would pass through this area and see the water steaming as it passed down the gulley to the ponds. This was the last time they had attempted to open the mines at Burgin. We sampled from two locations inside the old ponds, which can be reached by a short walk from Highway 6.

Collecting samples at the settling ponds near Elberta

Collecting samples at the settling ponds near Elberta

We then collected from the bottom of the wash at the mouth of the canyon leading up to Burgin. The soil here looked healthy and contained a combination of sand and humus. We then stopped at the old Burgin concentrator and took some pictures. I talked with the men at the main office of the Chief Consolidated Mine operations there about getting some samples from the tailings piles (they corrected me when I mentioned “tailings piles” around the headframes themselves and said those rocks were more properly called mine dumps or waste rock; tailings are the actual ore that has been processed).

Silver ore concentration plant at the Burgin mine

Silver ore concentration plant at the Burgin mine

We took photos around the Trixie headframe, then drove on up the canyon over the top of Silver Pass, which I had not done before. This was the opening of the deer hunt, so I didn’t want to venture too far from the road without orange clothing.

Headframe at the Trixie Mine above Burgin.

Headframe at the Trixie Mine above Burgin.

We also collected at a mine dump next to the road in Ruby Hollow, which I later identified as the Tesora Mine. The soil there had a bright yellow color and contained obvious sulfides. Part of the shaft is still there without much protection around it.

Collecting samples at the Tesora Mine dump in Ruby Gulch

Collecting samples at the Tesora Mine dump in Ruby Gulch

I also showed the students Silver City, the leeching pile from the 1980s when much of the waste rock and tailings were heaped up and cyanide solution was sprayed onto it, chelating the silver and gold out of the rocks. We stopped at the Bullion Beck headframe for photos and walked around the Tintic Mining Museum. It was late afternoon by then and time to get the students back.

Waste rock pile at the Swansea Consolidated Mine near Silver City

Waste rock pile at the Swansea Consolidated Mine near Silver City

Altogether we collected six samples from three sites and the students had a chance to get to know the area. I knew that we would have to be more productive on our next trips. Back at school, we did some simple pH tests and found the first two sites (Elberta Ponds and Burgin Wash) were near neutral pH, but the Tesora Mine samples were quite acidic, at a pH of about 3.5. Other tests would have to wait until we ordered the testing supplies.

Historic churches in Eureka, Utah.

Historic churches in Eureka, Utah.

Belt-driven drill press at the Tintic Mining Museum

Belt-driven drill press at the Tintic Mining Museum

Downtown Eureka, Utah: 2012Belt-driven drill press at the Tintic Mining Museum

Read Full Post »

Lab at Zzyzx

Lab Building at the Desert Research Station at Zzyzx Road, CA.

On this third day of our research project in the Mojave Desert, we did a series of tests on the biological soil crusts and soil samples we collected yesterday at three sites along Kelbaker Road near Baker, CA.

Parag and Rakesh

Parag and Rakesh demonstrate extraction protocols

The laboratory building at the Desert Research Station is set up with standard equipment for chemical and biological tests, including flasks, test tubes, Bunsen burners, sinks, a fume hood, etc. Most of the detailed equipment and supplies was brought by Rakesh Mogul and the other scientists working on this project, including a centrifuge, a spectrometer, pipettes and pumps, and test kits and reagents for the extractions and analyses we’d be doing.

Interior of lab

Inside the lab building at Zzyzx Road

The students and scientists had set up a series of protocols for the tests and a plan of attack for how to identify each sample. First, a group were taking samples of the crusts at each location and extracting the DNA from them. Each time, the scoop was sterilized with a Bunsen burner. The solution was then centrifuged to settle out the non-dissolved portions. Another group was at work using polymerase chain reaction techniques to increase the DNA yield so that the final sequencing could be done in a specialized lab. We’ll have the lab look at the specific species in the crusts, including the cyanobacteria, fungi, lichens, mosses, and archaea present in these symbiotic communities.

Extracting DNA

Extracting DNA from the biological soil crusts

Parag Vaishampayan worked with a group to extract ATP (adenosine triphosphate), which will give us a measure of metabolic rate in the crusts at each site. We sampled not only the crust itself but the soil directly underneath each sampled crust, and will look at ATP of the crust compared as a ratio to the ATP in the soil. The hypothesis is that the healthier crust will have a higher ratio.

Extracting ATP

Testing for ATP

Meanwhile, the soil itself was analyzed. Mary Beth Wilhelm and Liza Coe used a soil test kit to look for trace elements in the soil, such as aluminum, iron, chlorine, and magnesium. I helped do some of this analysis, since my background is in chemistry and geology. Rosalba Bonaccorsi, Ruben Hovanesian, and Leonard Bacon separated the soils using sieves to find the relative sizes of particles and materials at each site.

Soil tests

Testing the soils chemically

A final group of pre-math teachers developed a series of statistical tests to look at results of all these tests, including some ANOVA (analysis of variance) tests, which I vaguely remember from my masters degree program.

Pipette instruction

Instruction on pipette techniques

We got quite far with the tests today – it helps to have a group of people who are experienced and work well together. Although they come from all over the California State University system, the students are all in their second year in the program and know what to do and what each other’s strengths and weaknesses are. We all helped out where we had experitise. It was fun to see what college students can accomplish. We have one major remaining test for tomorrow: chlorophyll extraction and spectral analysis.

Statistical tests

Allison and Kristen working on statistical models

I also talked with Geoff Chu, Paul Mans, and Ryan Piaget from NASA Ames who are developing a prototype rover built from a commercial off-the-shelf RC car, with video camera provided by an Android phone controlled from a laptop over a local network. Motor servos are controlled by an Arduino brick. The point of this rover is to analyze the soil crusts remotely without having 20-odd people stomping around on them. The rover will be equipped with a stereoscopic IR camera that can read 3D depth, along with an RGB camera. My goal is to take the height data from the IR camera and convert it into a grayscale heightmap of the various crust locations, then turn the heightmap into a 3D model in Daz3D Bryce. The RGB photo will be mapped over the top of the model as a texture. Ultimately, the model can be uploaded to an online app where people can rotate and explore the crusts themselves.

Geoff and Paul

Geoff Chu and Paul Mans working on the RC rover

We had a preliminary results meeting after supper to look at what we have so far. The ATP analysis was not consistent across sites, possibly because the results changed as the day warmed up, but we’ll send the samples to labs for more accurate results.

Review session

Review session for today's results

Read Full Post »